PETG Repro

SPECIFICATION

• PET-G REPRO Filament on cardboard spool, vacuum packed
• Net: 1 kg, Gross: 1.1 kg
• Density in g/cm3: 1.27
• Diameter: 1.75mm +/- 0.05mm
• Roundness: +/-3%
• Extruder temperature depending on printing speed and layer thickness: 210°C - 235°C
• Recommended extruder temperature for initial tests: 220°C
• Print bed: approx. 70°C - 90°C for better adhesion and less shrinkage

PROCESSING INSTRUCTIONS

• Suitable for direct drive and Bowden extruders
• Printing speed 30-110mm/s depending on nozzle temperature and S

1. General Security Information

• For trained personnel only: 3D printing with PET-G filament requires knowledge of printer settings and material behavior. Children may only operate the 3D printer under adult supervision.
• Use only in well-ventilated rooms: Fumes can be produced when printing with PET-G. Therefore, adequate ventilation (ideally active extraction or filters) is required to ensure air quality.

2. Instructions for handling PET-G filament

• Store in a cool, dry placePET-G is sensitive to moisture. Store the filament in an airtight container and, if necessary, with a desiccant.
• Protect from UV radiationSunlight can cause the material to age prematurely and become brittle.
• Safe handling during printingDo not touch hot components (e.g. nozzle, heated bed) and avoid contact with moving parts during operation.

3. Special safety instructions

• Child and pet protection:Keep children and animals away from the printing area. Filament remnants or loose parts can be swallowed or pose a risk of injury.

First aid in case of incidents:

• Burns: Immediately cool skin with cold water after contact with hot printer parts or molten filament; seek medical help if necessary.
• fumesIf you experience discomfort or irritation from fumes: leave the room immediately, go outside to fresh air, and seek medical advice if symptoms persist.

4. User responsibility

• Careful handling requiredThe user is responsible for proper handling and safe operation.
• Suitable protective clothing recommendedWhen removing prints or performing maintenance work, heat-resistant gloves and, if necessary, safety glasses are recommended.