PLA Metallic

SPECIFICATION

• PLA filament on a spool, vacuum packed
• Net weight: 1000g. Gross weight: 1230g
• Tensile modulus 3500MPa
• Diameter 1.75 +/- 0.05mm
• Roundness: +/- 3%
• Extruder temperature varies depending on printing speed and layer thickness: 190–230°C
• Recommended extruder temperature for initial tests: 225°C
• Print bed: unheated, 60°C recommended for large-area projects

PROCESSING INSTRUCTIONS

• Suitable for direct drive and Bowden extruders
• Printing speed 30-150 mm/s depending on nozzle temperature and layer thickness

The first layer should be 0.3mm thick to compensate for unevenness in the print bed. The first layer should be printed at 130% print width to improve adhesion.

Setting the blower fan to 100% after the first layer helps to cool the melt quickly enough on overhangs.

1. General Security Information

• Use by trained personnel only3D printers and PLA filament should only be used by people familiar with the equipment and materials. Children should only operate the 3D printer under adult supervision.
• Well-ventilated roomsUse the 3D printer only in well-ventilated rooms to avoid the possible accumulation of fumes during the printing process.

2. Instructions for handling PLA filament

• Store in a dry placeStore PLA filament in a dry, cool place. Moisture can significantly impair the quality and printability of the filament.
• Avoid direct sunlightUV radiation can make the material brittle and impair its mechanical properties.
• Safe handlingAvoid contact with rotating or moving printer parts during operation.

3. Special safety instructions

• Child and pet safetyKeep children and pets away from the printer during the printing process. Small parts such as filament remnants can be swallowed.
• First aid for injuries:BurnsIn case of skin contact with hot components, immediately cool the affected area with cold water.Irritations from vaporsIf the person feels unwell due to the fumes, take them to fresh air and consult a doctor if the symptoms persist.

4. User responsibility

• Personal responsibilityThe user is responsible for the safe use of the product and should ensure that all instructions are carefully followed.
• Suitable protective clothingWhen handling hot printer filament, heat-resistant gloves can be helpful.